SSG Series Industrial-Grade UPS (1.5kVA to 3kVA)

UL listed to operate from -20°C to 55°C (-4°F to 131°F)

The ultra-reliable SSG UPS has been specifically designed for use in demanding thermal environments commonly found in industrial, military and rack mounted IT applications. Its wide thermal design margin assures reliable operation over a -20°C to +55°C temperature range. All models have received UL, cUL Listings and CE Certification for use over the same temperature range. Its on-line, double conversion topology provides the maximum level of power quality and protection, even while operating from marginal utility and generator power sources. Hot-swap batteries are located in thermally insulated, slide-out packs.
(view rack/tower brochure and specs), (view tower brochure and specs)
(view hardwire rackmount brochure and specs)
Used by: Boeing, ConocoPhillips, Littlefuse

SSG-RP Series Ultra-Wide Temperature UPS (1kVA to 3kVA)

UL listed to operate from -30°C to 65°C (-22°F to 149°F)

The ultra-wide temperature SSG-RP UPS has been specifically designed for use in harsh thermal environments.  Meets the demands of high temperature applications up to +65°C.  All models have received UL, cUL Listings and CE Certification. Its on-line, double conversion topology provides the maximum level of power quality and protection, even while operating from marginal utility and generator power sources. High temperature certified batteries are packaged in external hot-swappable battery banks.
(view brochure and specs)
Used by: Northrop Grumman, Caltrans, Sandridge Energy

Pre-Configured NEMA UPS Systems

The “ready-to-install” NEMA enclosure works with the SSG and SSG-RP UPS Series. The UPSes are UL, cUL and CE listed to operate in harsh temperature environments of -20°C to 50°C (SSG) and -30°C to 65° C (SSG-RP). Both locking and non-locking enclosure systems are available. The high-grade powder-coated enclosure features forced air cooling and the UPS inside is designed to swing up 90° for easy front panel access.

(view SSG 1.5 to 3kVA UPS with 12” deep NEMA brochure & specs)
(view SSG-RP 1 to 3kVA UPS with 12” deep NEMA brochure & specs)
Used by: WorleyParsons and Phillips 66

FN Series Parallelable, N+1 Redundant UPS (3kVA to 40kVA)

These stand-alone on-line Uninterruptible Power Supplies offer scalability and reliability at an economical cost. Rather than purchasing an expensive cabinet to house modules, a user can configure a UPS system using individual 3, 4, 5, 6, 8 or 10kVA models, providing up to 30kVA with N+1 redundancy.  If N+1 is not required, these units can be configured to 40kVA. The FN Series also features advanced Digital Signal Processing (DSP) microprocessor technology.
(view brochure and specs)
Used by: Alcoa, Covidien, State of Florida

FN Series Rackmount N+1 UPS (3kVA to 40kVA)

These rackmount on-line UPSs offer scalability and reliability, including galvanic isolation, at an economical cost. They are compact—the 6kVA is only 7U. Instead of using an expensive cabinet to house modules, a UPS system is configured with individual 5, 6, 8 or 10kVA models, providing up to 30kVA with N+1 redundancy. Also features high speed Digital Signal Processing (DSP) microprocessor technology.
(view brochure and specs)
Used by: CSC, Curtiss-Wright, Dept. of Defense Canada

SG Series On-line UPS (800VA to 6kVA)

Highly reliable online, sinewave UPS with field-proven history. Protects industrial, lab, IT and other critical equipment. Extended battery module option, providing UPS backup of up to four hours. Other options: input or output galvanic isolation; frequency conversion. (view brochure and specs)

SG 1-3kVA Tower Reference Guide
SG 5-6kVA Tower Reference Guide
Used by: Siemens, GT Solar, Histogenics

SG Series Rackmount On-line UPS (1kVA to 3kVA)

Highly reliable online, sinewave UPS power supplies for industrial, IT, lab, telecom and other critical equipment. Modules are a 19”, 2U rackmount form factor and 17.7” depth. Rackmount extended battery module options are available providing extended UPS backup. Models may be factory configured with Frequency Converter upon request.(view brochure and specs)

SG 1-3kVA Rackmount Reference Guide
Used by: L3, Stratos Global, OYO Geospace

ED -1 Series On-line UPS (1kVA to 5kVA)

Ultra-high performance Uninterruptible Power Supplies (UPS) for industrial and military COTS applications requiring a rugged UPS. Designed to protect sensitive equipment used in harsh power environments. Supports high inrush loads and high temperature environments. Other ED Series models are available offering operation as Voltage and Frequency Converters and precision AC voltage regulators. The 3-5kVA models are some of the smallest and most lightweight units of their kind.
(view brochure and specs)
Used by: BAE, Raytheon, Pall Corp.

ED Series Rackmount On-line UPS (1kVA to 5kVA)
50/60/400Hz Input/Output

(1kVA to 2.4kVA)
(3kVA to 5kVA)

Small and lightweight units that can be configured as an on-line UPS, AC voltage regulator, frequency converter or phase converter. Provides a wide input range with tight output voltage regulation of +3%, as well as extended brownout protection. Accepts a 50, 60 or 400Hz input with a 50, 60 or 400Hz output. Optional high temperature batteries and ruggedized models are available. Models supporting single and three-phase inputs with single-phase outputs are offered. This series utilizes a field-proven high performance online design and is ideal for military COTS and aviation applications.
(view 1 to 2.4kVA brochure and specs)
(view 3 to 5kVA specs)
Used by: MIT, JPL, Stratograph