FN Series™ UPS PLUS® - 3kVA to 40kVA [split-phase output]
Advanced Features
- Parallel Units with a Single
Output of up to 40kVA
- True N+1 Redundancy
- DSP Double-Conversion
On-line Sinewave Design
- Input Power Factor Correction
- Hot-Swappable User
Replaceable Batteries
- LCD Display with
Advanced Monitoring for
Easy UPS Management
- Programmable 50/60Hz
Frequency Conversion
- Optional Remote Emergency
Power Off (REPO)
- Wide Input Voltage Window
- Precision Output Voltage
Regulation
- Superior Brownout, Surge & Transient Protection
- Optional Extended Battery
Banks & Chargers
- RS-232C, USB & Optional
SNMP/HTTP Agent
- UPSilon® UPS Monitoring & Management Software
Parallel Units up to 40kVA
Businesses today rely on absolute system
availability and scalability. The Falcon®
Electric FN Parallelable, N+1 Redundant
On-line Uninterruptible Power Supply (UPS)
provides the ideal solution. The FN Series
UPS can easily be configured using
individual 3, 4, 5, 6, 8 or 10kVA models,
providing up to 30kVA with N+1 redundancy.
Alternate parallel configurations of 6 to
40kVA are achievable if N+1 redundancy is
not required.
Stand-Alone Units Lower Costs
In contrast to most modular scalable
Uninterruptible Power Supplies, the FN
Series are stand-alone units that may be connected
in parallel. This economical approach
eliminates the added expense of buying
cabinets to house control, power and battery
modules.
True Regenerative On-line Design
The FN Series True Regenerative On-Line
UPS provides the highest level of protection
against the widest spectrum of power
problems. The incoming AC utility source is
converted to a regulated DC voltage. From
this DC voltage, a new AC voltage is
generated, providing clean, tightly regulated
power to your equipment.
N+1 Redundancy Ensures Reliability
If your equipment has to operate without
interruption or downtime, the N+1 configured
FN UPS is the clear choice. Should an
individual UPS require maintenance, the
UPS is automatically sensed and taken
offline. The user is notified through the LCD
display and an audible alarm.
The unit may be serviced or replaced without
the remaining UPS(es) or connected load
having to be powered down. Internal UPS
batteries are user-replaceable and
hot-swappable, again while the UPS(es) and
connected equipment are in full operation.
Plus Microprocessor Control with
DSP
Falcon Electric's FN UPS has been designed
using advanced Digital Signal Processing
(DSP) microprocessor technology. DSP
technology yields the highest level of internal
UPS protection, control, performance and
reliability.
Plus Frequency Converter Ready
The FN UPS Plus is easily programmed for
use as a 50Hz or 60Hz frequency converter,
making the FN Series UPS Plus the ideal
choice for worldwide power applications.
Plus RS-232, USB & SNMP/HTTP
UPS Management
With the supplied UPSilon® software, all models
support unattended shutdown, UPS
management, data logging and a power
diagnostic tool. The software supports all
Windows® platforms including Vista, as well as
Novell NetWare® 5 & 6, LINUX and FreeBSD.
UPSilon for UNIX is available at an
additional cost and supports most popular
UNIX platform and OS versions.
Falcon’s optional SNMP/HTTP agent board
provides TCP-IP addressable remote management
and monitoring over any 10/100
Ethernet LAN, WAN or the Internet. The agent
board installs via a communications
expansion slot located on the back of every
FN Series model. Client software is supplied
that supports the shutdown of multiple workstations
and servers via the network. |
