Advanced Features

  • Parallel Rackmount Units with a Single Output of up to 24kVA
  • True N+1 Redundancy
  • ECO Mode: 97% Efficiency
  • DSP Double-Conversion On-line Sinewave Design
  • Input Power Factor Correction
  • Programmable 50/60Hz Frequency Conversion
  • Precision Output Voltage Regulation
  • Extended Brownout, Surge & Transient Protection
  • Remote Emergency Power Off (REPO)
  • Optional Extended Battery Banks & Chargers
  • RS-232C, USB & Optional SNMP/HTTP Agent

Scalable Rackmount UPS up to 24kVA

Falcon Electric’s scalable N+1 on-line Uninterruptible Power Supply (UPS) provides the ideal scalable power protection solution. The FN UPS can easily be configured using individual 3, 4, 5 & 6kVA rackmount models, providing up to 18kVA with N+1 redundancy. Alternate parallel configurations of 6 to 24kVA are achievable if N+1 redundancy is not required.

Stand-Alone Units Lower Costs

In contrast to other modular UPSs, the FN is a compact, stand-alone UPS that can be connected in parallel. This economical approach eliminates the added expense of buying cabinets to house control, power and battery modules.

N+1 Redundancy Ensures Reliability

If your equipment has to operate without interruption or downtime, the N+1 configured FN UPS is the clear choice. Should an individual unit require maintenance, it is automatically sensed and taken offline. The user is notified through the LCD display and an audible alarm.

The UPS may be serviced or replaced without powering down the remaining models or connected load. Internal batteries are user-replaceable and hot-swappable, while the UPS and connected equipment are in full operation.

Frequency Converter Ready

The FN UPS is easily programmed for use as a 50Hz or 60Hz frequency converter, making the FN Series UPS the ideal choice for worldwide power applications.

ECO Mode Saves Energy

The unit’s “ECO Green Mode” setting increases the AC/AC efficiency up to 97% during times when the connected equipment is not in use. Falcon’s ECO Mode reduces energy consumption, cooling expense and CO2 emissions.

In addition, the FN UPS features input power factor correction which lowers current demands on building wiring. When not in ECO Mode, the FN operates at a 90% AC/AC efficiency level, further reducing energy demands.

True Regenerative On-line Design

The FN Series True Regenerative Online UPS provides the highest level of protection against the widest spectrum of power problems. The incoming AC utility source is converted to a regulated DC voltage. From this DC voltage, a new AC voltage is generated, providing clean, tightly regulated power to your equipment.

Microprocessor Control with DSP

Falcon Electric’s FN UPS has been designed using advanced Digital Signal Processing (DSP) microprocessor technology. DSP technology yields the highest level of internal UPS protection, control, performance and reliability.

RS-232, USB & SNMP/HTTP UPS Management

With the supplied UPSilon software, all models support unattended shutdown, UPS management, data logging and a power diagnostic tool. The software supports all Windows and other major platforms. For UNIX users, UPSilon is available as an option. Falcon also offers an optional SNMP/HTTP agent board.